The smallest heads need the greatest protection. Features - Ximo Flash Reflective elements Detachable Multi-Fit light Weight : approx. 230 g Technologies INMOLD Inmold helmets are produced by foaming the inner shell underneath the outer shell under high pressure and heat. Thanks to the complete bonding between the upper and lower shells INMOLD helmets are extremely sturdy and very light. In addition, they offer clearly more safety than spot-bonded helmets. HI-EPS The inner shell of all INMOLD helmets is made of HI-EPS (High Expanded Polystyrene). It consists of a multitude of microscopic air pockets that absorb the forces occurring in an impact. In addition, HI-EPS absorbs neither water nor sweat. CERAMIC SHELL That's the name for the outer shell of all ALPINA helmets featuring INMOLD manufacturing technology. This thin and light-weight material is extremely break- and scratch-resistant, UV-stable and antistatic. EDGE PROTECT Edge Protect is applied to the bottom edges of the helmet using Inmold technology – delivering a true plus in safety in side impacts and protection against damage in day-to-day use. ERGOMATIC Tried and tested countless times, this is the buckle used in all Alpina cycle helmets. It features a red push button and multi-step automatic adjustment. It can be used one-handed, so for example you can loosen the strap when riding uphill and tighten it again for the descent, and it will not open in the event of a crash. RUN SYSTEM CLASSIC Riders using their bikes for short trips to the supermarket do not necessarily need a highly sophisticated adjustment system. For such needs, our RUN SYSTEM CLASSIC suffi ces. A simple and rugged control knob keeps the helmet where it belongs: on the rider’s head. Y-CLIP A helmet can only provide proper protection if it stays securely in place in the event of an impact. The fastening that joins the two straps under the ear is critical to this. Alpina‘s Y-Clip system guarantees a perfect fit down to the last millimetre, all in a matter of seconds. AIR FLOW VENTING ALPINA developers invest a lot of time and energy in continually improving the ventilation of our bike helmets. By using a wind tunnel tested configuration of the vents our engineers achieve a “Venturi” effect inside the helmet. It cools the head, reduces perspiration and increases performance. FLY NET For protection against insect bites, the front holes of some models are lined with a net.
Velomio.com collects all products and prices from the biggest webshops in the world, and we serve them to you in a nice design. This means you can easily navigate between hundreds of webshops and find the products you need.